How Do I Fit A Velux Window?

Velux Installation Instructions and DIY guides.Above-it-All install VELUX windows in Manchester, Lancashire and Cheshire.

The procedure of fit a velux window, It will require the use of an electric disc cutter or petrol cutter to cut the tiles up the side of the window, unless you are very lucky and the tiles dont need trimming on the sides. Normally you will need to cut a roof rafter (4 b2) and then make a square shaped frame which should be on the outside edges of your velux window frame .Also make sure when you decide where you`re going fit the velux frame it is aprox 2 inches above one of the roof battens which the tile is attached to, so the front flashings on your velux can sit in and cover the tiles correctly. Also with roof tiles remember to always start on the lowest areas and then work upwards.

Velux windows are those that are fixed on tops of the roof. to find the location where you want to fit it. then buy all the materials that you will need. remove the tiles from the roof to create the space that would fit the velux that you intend to fix. make a framework around the area that the tiles were by adding additional timbers to strengthen it. then install the velux window on the opening using the pre-fitted straps. then mould the flashing to the tile and shape the window opening. then put back the roof tiles into a correct position. mark the tiles and put them into a fitting against the velux window frame. then finally replace the flux opening sash.

Velux windows are light in weight, but they are substantially built, and handling them alone on a roof can be dangerous. Do not nail through the flashing, down into the roof material -- only nail the flashing into the skylight itself with the nails that are provided with the kit.

Roof windows are usually an easy affordable way to give you extra light in the unused loft space in your home. When fitting velux windows, you need first to determine the position of the window in your roof. It is important to observe building regulations and planning permission laws and if you are in any doubt, talk to the building control department of your local council. The opening for the velux window should be prepared by removing enough tiles or slates from the area. These are easily accessed by cutting away some felt from underneath which gives you access to the tiles and battens. By cutting away one of the battens from under a tile you will be in a position to slide that tile, and then the other tiles, into the roof space. Once enough tiles are removed you also be in a position to be able to cut away the necessary roof timbers to form the correct sized opening. The next procedure is to lay back the tiles into position up to the sides of the new window frame. Finally the sash of the window is then re-fitted and you are ready to make good and redecorate inside.

Velux has supplied high-quality roof windows for over 60 years. With product features that are second to none, you’ll enjoy the ideal combination of lots of daylight, fresh air and a clear view creating the perfect environment for your home. On how to fix the window check this site.