‚Äč

How to Install a Martin Style Truss Rod.?

Answer

1. Lay the guitar facing upward on a table and support the neck. Remove the strings. 2. Pry loose the plastic edging on the sides of the fretboard with a spatula. Start at the top of the neck and work down slowly using very gentle pressure. Some
source: www.ehow.com
Q&A Related to "How to Install a Martin Style Truss Rod."
The truss manufacturer send a detailed drawing of how the trusses should be laid out. So if you follow those simple instructions you should be fine.
http://answers.ask.com/Business/Constructions_and_...
It's a long rod lodged up in the neck of a guitar used for keeping the neck of the guitar straight. The truss rod is used to allow the neck to bend either way in response to the tension
http://wiki.answers.com/Q/What_is_a_truss_rod
( ′trəs ′räd ) (civil engineering) A rod attached to the ends of a trussed beam which transmits the strain due to downward pressure.
http://www.answers.com/topic/truss-rod
Explore this Topic
Truss rods are devices installed in the neck that stabilise and maintain the straightness of the neck along its length and can be adjustable or non adjustable. ...
A truss rod is a term used to refer to a device on a guitar or banjo neck used to stabilize and control the neck straightness along its length. It is also used ...
While installing trusses is not an easy job, you can do this project if you have some basic skills. You will need a variety of tools and you will want to have ...
About -  Privacy -  Your Cookie Choices  -  Careers -  About P.G. Wodehouse -  Articles -  Help -  Feedback © 2014 IAC Search & Media