‚Äč

How to Replace Ball Joints?

Answer

Ball joint replacement is not an easy job. The ball joints are the moving connection between the axles and the steering assembly. You would need to be knowledgeable in auto repair, before trying to take on this job. For more information see here:
source: answers.ask.com
Q&A Related to "How to Replace Ball Joints?"
1. Drive the vehicle in reverse onto car or truck ramps so that the rear of the vehicle is lifted off the ground. Engage the parking brake and put the transmission into park. Grab
http://www.ehow.com/how_4870313_replace-universal-...
1 Prep the work area. Park on a flat surface and block both rear wheels, front and back. Jack both front wheels off the ground. You may find it easier to work on the assembly if you
http://www.wikihow.com/Replace-Ball-Joints
1. Raise and support the car on jack stands. Remove the wheels using the lug wrench. Remove the two bolts from the brake caliper and remove the caliper. Pull the rotor off the hub
http://www.ehow.com/how_5383184_replace-joints-set...
Explore this Topic
There are various ways to replace the lower ball join on a 2000 Dodge Neon. Visit an auto shop for the parts and helpful information on replacing it. You can search ...
The internet is a good source to find information about the surgical removal of a joint. There are a variety of surgeries where this happens. Joint replacement ...
A u-joint is replaced by first unbolting the retaining straps. The drive shaft can then be pulled back slightly to allow the joint to be removed. New joints are ...
About -  Privacy -  Your Cookie Choices  -  Careers -  About P.G. Wodehouse -  Articles -  Help -  Feedback © 2014 IAC Search & Media